Clear Frosted Glass Perfume Bottle is a flint glass bottle that has been acid-etched or sandblasted on the outside to give it a translucent matte look. The treatment diffuses light at 60%–85% and offers a gentle tactile feel to the bottle, hinting at understated luxury. Founded in 2005, Xuzhou Muzhishi Crafts Co., Ltd. makes these bottles in 20 ml, 30 ml, 50 ml and 60 ml capacities and has equipment scalable for trial orders as well as large-volume manufacturing runs.
Store lighting shows fingerprints, surface imperfections, oil spots on typical clear glass. All three difficulties are treated in one surface treatment with frost finish.
The matte texture diffuses the light that hits it, such that micro-scratches are not visible in typical use. This same dispersion effect is also the limiting factor for direct UV exposure to the inside of the container, a very critical consideration for fragrance compositions, especially high-concentration Extrait de Parfum and pure essential oils under strong boutique or store lighting.
The frosted surface also adds friction for a better grip. It's a better grip, so there's less possibility of dropping travel-size bottles and testers that are used over and over again in boutique situations.”

| Feature | Details |
|---|---|
| Material | Premium Flint Glass |
| Available Capacities | 20ml, 30ml, 50ml, 60ml |
| Surface Finish | Acid-etched Frosted |
| Shape Options | Cylinder |
| Closure Type | Screw Cap / Pump Sprayer |
| Sealing Type | Pump Sprayer with Silicone Ring |
| Surface Treatments | Gold Stamp, Hot Stamping, Silk Screen Printing, Inside Engraving |
| Cap Materials | Plastic (Gold, Silver, or Custom Colors) |
| Model Numbers | CP-P-067, CP-P-067-1, CP-P-067-2, CP-P-067-3 |
| Origin | Jiangsu, China |
| Brand | Muzhishi |
Our bottles are utilised in many professional sectors where brand perception is directly affected by the quality of packaging.
Frosted glass is utilised by niche and designer fragrance brands to ensure a consistent premium retail presentation. The matte surface looks clean even after continuous customer handling in high-traffic retail locations where a smooth glass surface would be fingerprinted and smudged.
The frosted surface has a UV-diffusion effect that producers of aromatherapy and high-concentration perfume enjoy. To safeguard the sensitive chemicals in Extrait de Parfum and pure essential oil compositions shown under intense boutique lighting, limit the amount of direct UV exposure on the bottle surface.
Travel and Sample-Size Fragrance Lines Frosted bottles are favoured as the texture offers better grip and absorbs little impact. Both features serve to keep the product safe during transit in bags or luggage.
Private Label Cosmetic Brands launching a new line can take use of our OEM and ODM services to have custom designed frosted bottles with logos, screen printing or hot-stamping put right over the frosted surface.

Muzhishi's Clear Frosted Glass Perfume Bottles go through a rigorous inspection process before shipping.
Frosting Uniformity Check: Each batch is visually and digitally haze meter tested to ensure that there are no cloud spots, uneven patches or streaks on the frosted surface.
Neck Finish Accuracy: The 18/415 or FEA15 neck dimensions are held to a tolerance of ±0.1 mm to provide a leak-proof fit with standard pump dispensers.
Vacuum Leakage Test: The bottle-pump interface is tested at a pressure of 0.05 MPa to 0.08 MPa to ensure a good seal at the time of pressure.
Surface Adhesion Test (3M Tape Test): The adhesion strength of logos and decorations applied over the icing is tested to ensure they will not pull off during normal use.
Internal Stress Analysis: Polariscopes are used to check that the annealing process has relieved thermal stress points produced during glass formation and acid-etching.
We have CE FDA SGS LFGB certificates for cosmetic packaging application.

Step 1 – Raw Glass Formation: Flint glass is melted in our furnaces and formed by automated blowing or pressing to the base bottle shape.
Step 2 – Annealing: Bottles travel through a controlled cooling tunnel to reduce internal thermal stress and meet impact resistance requirements.
Step 3 – Frosting (Surface Treatment): The frosted matte effect is obtained through acid etching or sandblasting the bottles. The etch depth is regulated to reach the desired light transmission rate of 60%–85%.
Step 4 – Anti-Fingerprint Nano-Coating (Optional): After frosting, a nano-coating can be applied to assist the matte look visually clean through frequent consumer handling.
Step 5 – Decoration & Customisation: Logo application, screen printing, hot-stamping or interior engraving is performed at this level. The 3M tape test is used to confirm the adhesion before advancing.
Step 6 – Final Inspection and Packaging: Each bottle is inspected for verticality, neck finish dimensions, surface uniformity and seal integrity. Bottles are packed according to customer requirements.

Q: Does icing the glass make it weaker?
A: No, acid-etching is a surface-only treatment. The bottle retains its structural integrity according to the requirements of impact resistance if thorough annealing is carried out.
Q: Are these bottles recyclable?
A: Yeah. The frosted appearance is incorporated into the glass itself and doesn't include any plastic laminates, meaning the bottle may be fully recycled in regular glass recycling facilities.
Q: How do you avoid fingerprints on the frosted surface?
A: After frosting the bottles can optionally be coated with anti-fingerprint nano-coating. This coating is designed to maintain the clean matte look with continuous consumer use.
Q: Does the frosted surface scratch easily?
A: The roughness of acid-etched frost scatters the light, so little surface scratches are far less obvious than they would be on flat clear glass.
Q: Will scent chemicals react with the frosted finish?
A: No. Frosting is only put on the outside surface. The products are made of untreated flint glass, therefore there is no chemical contact with the aroma compound.
Q: Can we customise B2B orders?
A: Options are capacity (20 ml to 60 ml), colour, surface treatment, logo method (hot stamping or screen printing), neck style, label and packaging box. Sample lead time is 3-5 days, mass production around 30 days after sample approval.
We will confirm whether your requirements for Clear Frosted Glass Perfume Bottle are achievable and outline next steps for sample development.
Contact us: long@muzhishi.com
Our customers’ satisfaction speaks for our quality — contact us to experience the same reliable service.